Modular Homes for Modern Living

Standard house element

1. Inner decoration as required: Gypsum board Gyproc/Knauf 12.5mm Interior boarding spruce 12x120mm is assembled on site. 2. Additional wall reinforcement to stiffen walls and strengthen the interior surface according to your wish: Fibreboard 12mm, higher moisture resistant Chipboard OSB-3 10mm 3. Batten 45×45mm, c/c (step) 600mm, vertical/horizontal 4. Electric installation as required by customer (PVC hoses, boxes) 5. Wool insulation 50mm (“Isover”/“Paroc” /“Rockwool”) 6. Vapour/steam barrier 2mkr polyethylene film 0.2mm UV-resistant 7. Load-bearing wooden frame 45×195mm, spruce, calibrated, strength- sorted C16/C24, c/c (step) 600mm, moisture content 15%±3% 8. Wool insulation 100+100mm (“Isover”/ “Paroc”/“Rockwool”) 9. Wind barrier board either required by the customer (joints sealed with silicon): Wind barrier gypsum board 9mm, moisture resistant (standard) Chipboard OSB- 3, 10mm (additional wall stiffening). Wind barrier board “Isotex” 12 mm. Fibreboard 12 mm, higher moisture resistant (additional wall stiffening). 10. Additional sealing against moisture and water “Tyvek Solid” (manufacturer “DuPont”, breathing membrane overlaps the element by 200-300 mm and reaches on top of the outer surface of windows and doors by 10-20 mm. 11. Battens 21×45mm; 28x70mm or 45x45mm (according to the type of building) 12. Facade cover boarding and/ or Cladding as required by customer, the popular types used: Profile UYVk 21x145mm, Spruce/Larch, fine-sawn/planed surface, vertical/horizontal. Profile SHk 21x145mm+ SHk 21x145mm, (2 layers overlapping 20-30mm ) Spruce/Larch, fine-sawn/planed surface vertical. Unedged boarding “Wilmark”, Spruce, 25×200-400mm, overlap 20-50mm, vertical/horizontal. 13. Rodent barrier: galvanized wire net 0.65mm, cell size 6x6mm, covers the gaps between vertical laths behind the boarding in the lower part of the wall